A 30 by 30 inch shower passes code in most of the country. Angi’s sizing guide says most people find it too tight, and anyone who’s tried to rinse shampoo out in one knows why.
For one person, 36 by 36 inches is the comfortable minimum, and that’s the size the National Kitchen and Bath Association recommends.
A walk in shower with real room to move starts at about 48 by 36. Go to 60 by 36 or more if you want a bench, a second person or no door at all. The size you can actually use depends on one more number, too, and it’s smaller than the space you’ll measure once the old shower comes out.
Walk In Shower Size Chart: From Code Minimum to Two Person
These are finished inside dimensions, measured tile face to tile face.
| Size (inches) | Area (sq in) | What it fits |
|---|---|---|
| 30 x 30 | 900 | The code minimum. A quick rinse, little room to turn |
| 36 x 36 | 1,296 | One person comfortably; the NKBA recommended minimum |
| 48 x 36 | 1,728 | A standard walk in; room to turn and step out of the spray |
| 60 x 30 | 1,800 | The usual tub alcove, and the default for a tub to shower conversion |
| 60 x 36 | 2,160 | A bench, two showerheads, or a doorless entry |
| 60 x 42 and up | 2,520 and up | Two people at once with room to spare |
Ranges come from This Old House’s size guide (updated April 2026) and Block Renovation’s minimum dimensions guide (June 2026). Most showers people call walk ins land between 48 by 36 and 60 by 36.
What the Code Requires, and What It Doesn’t
The residential code most towns enforce sets the floor at 900 square inches of inside area, with no side shorter than 30 inches. That space has to hold from the drain up to 70 inches high, so a sloped ceiling or a knee wall can’t pinch it. There’s one exception, which lets one side drop to 25 inches if the total area reaches 1,300 square inches.
That’s all the code says about size. It’s a safety minimum so a person can stand and wash, and it isn’t meant as a comfort target.
Pennsylvania towns enforce the 2021 edition of that code, and your local permit office has the final word on how it’s applied. Design guides also ask for about 24 inches of clear floor in front of the shower entry, and 30 gives you more room to dry off.
How Big a Walk In Shower Feels Comfortable
Comfort comes down to elbows and turning. Raise your arms to wash your hair and your elbows need room on both sides, which is why a shower that’s 36 inches across is where it usually stops feeling like a box.
- 36 by 36 fits one adult who showers standing and won’t need a seat.
- 42 by 42 gives you room to bend over and shave your legs or wash a child.
- 48 by 36 is the standard walk in. You can step out of the spray while you lather and turn around without brushing the walls.
- A bench adds 12 to 15 inches of depth, so a 36 inch deep shower with a built in seat starts to feel like a 30 inch one, and you’ll want to add that depth rather than give it up.
If two sizes fit your room, take the bigger one. Block Renovation puts the step from 30 by 30 up to 36 by 36 at a few hundred dollars in extra tile and waterproofing, which is small next to living with a cramped shower for years.
Doorless Walk In Showers Need More Length
A shower with no door keeps the water in by distance. The spray has to run out of energy before it reaches the open end, so the shower needs length more than width.
Block Renovation’s guide to doorless designs puts the minimum shower wall at 60 inches, in a bathroom of at least 50 square feet. Three things make that length work:
- The showerhead goes opposite the opening, so the spray points away from the bathroom floor.
- A fixed glass panel covers about two thirds of the opening when there’s no full wall on that side, which Dulles Glass, a shower glass fabricator, says is enough to stop splash from a standard showerhead.
- The floor slopes toward the drain, with the drain at the far end from the entry.
Under about 50 square feet, a doorless layout usually means a full height fixed panel or a curb plus a short screen. If the opening is small, a hinged glass door or even a curtain may keep the floor drier than open space can.
Sizes for Two People, a Bench or Aging in Place
Some households need more than a comfortable single shower. These are the numbers to plan around:
- Two people at once: start at 60 by 36, and 60 by 42 is better with two showerheads.
- A parent bathing small children: 48 by 36 with a bench to sit on.
- Aging in place: at least 36 inches wide, built without a curb, with wall blocking behind the tile for grab bars later.
- A wheelchair: the ADA’s roll in shower is at least 30 by 60 inches, and its transfer shower is 36 by 36 with a seat. The ADA doesn’t apply to private homes, but those numbers are what designers borrow for an accessible bathroom.
Every one of these sizes is easier to build when the room is open to the studs. Tile handles any custom size, while acrylic and other prefab shower options mostly come in stock sizes, so a 42 inch deep shower may decide the material for you.
Measure the Finished Size, Not the Framing
Tile, backer board and waterproofing take up space. Block Renovation figures about half an inch to an inch per wall, so a shower framed at 30 inches between the studs finishes at about 27 or 28 inches. That’s below the code minimum.
So frame wider than the size you want. A 30 inch finished shower needs about 32 to 33 inches between studs, and a 36 inch shower needs about 38 to 39.
This catches people most often in a tub to shower conversion. A 60 inch tub alcove is usually about 30 inches deep, and once new walls go on, it can finish a little under 30. Pushing a wall back to gain depth adds framing and drywall work on top of what a tub to shower conversion costs, so decide on it before demo day.
Before you talk sizes with anyone, measure the bathroom the way a contractor will, wall to wall at more than one height, because older walls often aren’t square.
How to Pick Your Walk In Shower Size
Start from how you’ll use it, then check it against the room.
- One person, standing, in a small bathroom: 36 by 36 finished, and 42 by 36 if a few inches are free.
- A primary bath shower you’ll use every day: 48 by 36 at the least.
- A bench, two people or no door: 60 by 36 or more, and a 50 square foot room for doorless.
- Staying for the long run: 36 inches wide or more, curbless, with blocking for grab bars.
Then add the wall buildup before anyone frames, and keep 24 to 30 inches of clear floor in front of the entry. If you’re weighing two sizes, our bathroom remodeling team can lay both out in tape on your floor during a free estimate, so you can stand in each one before you choose.
Frequently Asked Questions
What is a good size for a walk in shower?
Plan for at least 48 by 36 inches. That’ll give one person room to turn and step out of the spray. Go to 60 by 36 if you want a bench, two showerheads or no door.
Is a 30 by 30 inch shower big enough?
It meets the code minimum, so it’s legal in most towns. Most adults find it cramped, though, and 36 by 36 inches is the size the National Kitchen and Bath Association recommends for comfort.
What is the minimum size for a two person shower?
About 60 by 36 inches. A depth of 42 inches or more works better if each person has their own showerhead.
How big does a shower with no door need to be?
Plan on a shower wall at least 60 inches long in a bathroom of about 50 square feet or more. Put the showerhead on the wall opposite the open end, and add a fixed glass panel if the opening is wide.
How much space do you need in front of a shower?
About 24 inches of clear floor in front of the entry is the usual minimum, and 30 inches gives you more room to dry off and move. A hinged glass door also needs its full width to swing open.
What is the standard size of a shower?
The most common shower stall is 36 by 36 inches. Walk in showers usually run from 48 by 36 to 60 by 36, and a tub to shower conversion in a standard alcove is often about 60 by 30.
Get Your Free Quote
Tell us about your project and we will get back to you with a real number for your space. No pressure, no obligation.



