A simple clock icon with a gold-brown circular background. The hour hand points to 9 and the minute hand points to 5, indicating the time is approximately 9:25. The clock hands and markings are dark green.

Open

Monday to Friday, 8AM to 5PM

Radon in NEPA Basements: The Numbers and the Fix

Two men stand in a concrete basement, one holding a mug and the other pointing at a radon gauge attached to a white support pole. The first man wears a red and black flannel shirt, while the second wears a grey t-shirt and work pants. The room features grey cinder block walls.

In Pennsylvania, the basement is where radon runs highest. State test data puts the basement average around 7 picocuries per liter (pCi/L), about twice the first floor’s. And roughly 40 percent of tested homes come in at or above the EPA’s 4 pCi/L action level.

So radon in Northeastern Pennsylvania basements is a test first question. Test before you finish, then let the number pick the plan.

Under 2, keep testing every couple of years. From 2 to 4, consider a fix. At 4 or higher, confirm it and put in a mitigation system before the walls close.

The state will also mail you a free test kit at two different points in that process, and most homeowners never ask for either one.

Radon in Northeastern Pennsylvania Basements, by the Numbers

The headline number comes from the Pennsylvania Department of Environmental Protection: about 40 percent of homes tested in the state are above the action level. A U.S. Geological Survey study of 548,507 Pennsylvania tests from 1990 to 2007 found almost the same thing: 39 percent at or above 4 pCi/L. Most of the high radon rock it mapped sits in the eastern part of the state.

Then there’s where in the house the radon shows up. Basements average about 7 pCi/L statewide, and first floors about 3.5, according to DEP figures shared by the Pennsylvania Association of Realtors. That’s twice as high one floor down, which matters a lot when the floor you’re about to make livable is the lower one.

A few more numbers worth knowing:

  • Radon has been found in all 67 counties.
  • More than 5,000 Pennsylvania homes have tested above 100 pCi/L, which is 25 times the action level.
  • Radon is the second leading cause of lung cancer in the U.S., behind smoking.

None of that tells you what your own basement reads. Two houses on the same street can test very differently, so the only number that counts is yours. (For why the test belongs before framing, see testing for radon before you finish a basement.)


How to Test So the Number Holds Up

A test only helps if you can trust the number. Four habits make it trustworthy:

  • Test in the basement, where DEP says levels usually run highest. The EPA says the same thing another way: test the lowest level you live in or plan to.
  • Close the house first. For a two or three day test, the EPA says to keep windows and outside doors shut for 12 hours before you start. Keep them shut during the test, too.
  • Pick the heating season, which DEP prefers, since the house is closed up anyway.
  • Choose the kit: a short term kit from a hardware store runs about $20 to $30 and takes two to seven days. A long term test runs for months and gives a better picture of the whole year.

If you’d rather not handle it yourself, a state certified tester typically charges around $150.


What to Do at Each Radon Level

This is where the number turns into a plan. The bands below follow the EPA’s guidance and DEP’s confirmation advice:

Your resultWhat it meansWhat to do
Under 2 pCi/LLow for PennsylvaniaFinish as planned; retest after the finish and about every two years
2 to 3.9 pCi/LBelow the action level, still elevatedThe EPA says to consider a fix; cheapest to decide before the walls close
4 to 8 pCi/LAt or above the action levelConfirm with a second test (short term or long term), then mitigate if it holds
Above 8 pCi/LWell above the action levelConfirm with a quick second short term test rather than waiting months, then mitigate
Above 100 pCi/LVery highConfirm right away (DEP mails a free confirmation kit at this level) and plan a fix quickly

The 2 to 4 band is the judgment call. Levels under 2 are hard to reach even with a system, but a basement you’ll use every day is the space where a few points matter most.


What the Fix Is and What It Costs

The usual fix is active soil depressurization. A contractor drills through the slab and sets a pipe into the soil underneath. The pipe runs up and out of the house, and a small fan pulls radon from under the floor before it can get inside.

Openings like the sump pit get sealed so the fan isn’t pulling basement air instead of soil gas. That sealing step is covered in how finishing a basement can make radon worse.

The EPA says some radon reduction systems cut levels by up to 99 percent. DEP says an install usually takes less than a day, and the installer should run a follow up test at least 24 hours after the system starts.

What it costs, nationally, according to Angi’s September 2026 figures:

  • About $1,043 on average, with most jobs between $805 and $1,326.
  • Active suction systems listed from $1,000 to $3,000, depending on the house.
  • Sealing cracks alone is cheaper but only about half as effective.
  • The fan’s electricity runs roughly $30 to $300 a year, and most fans last up to 10 years.

Prices vary a lot by house, so get a quote from a certified mitigator. In a finished basement the pipe often has to run through a closet or an outside wall. That’s why it’s cheaper and cleaner to put in while the framing’s still open.

One more thing to check: how the finished basement gets its fresh air. An exhaust only fan pulls air out of the house and can draw more soil gas in, which is part of why ventilation for a finished basement needs a little planning.


Who Can Test and Fix Radon in Pennsylvania

Pennsylvania licenses radon work under the Radon Certification Act, and DEP’s rules are in 25 Pa. Code Chapter 240. Anyone you hire to test, to install a mitigation system, or to analyze a test device has to be certified for that work.

There’s one exception that matters to homeowners. Section 240.2 says the rules don’t apply to a person testing or mitigating a building they own or live in. So you can run your own test kit, and the certification rules don’t stop you from installing your own system.

Most people still hire it out, and for good reasons: a certified mitigator knows how to size the fan, seal the slab and route the pipe so it works. DEP keeps a Radon Services Directory of certified testers and mitigators by county, which is the place to start.


The Free Radon Kits Pennsylvania Mails Out

DEP sends free test kits at two points, and both take a phone call or a form.

  • A free confirmation kit if your screening test came back above 100 pCi/L.
  • A free long term kit (an alpha track test) if you’ve had an active, fan powered system installed in the last year. You send proof of the install and a post mitigation result under 4 pCi/L, and it takes six to eight weeks to arrive.

That second kit is the useful one for a newly finished basement. A long test after the fix tells you what you’re breathing across the seasons, not just for a few days. DEP’s radon hotline is 800-237-2366.


A Radon Plan for the Basement You’re About to Finish

Put these in your schedule in this order:

  1. Test before you frame, in the basement, with the house closed.
  2. Act on the number using the bands above. At 4 or higher, confirm and hire a certified mitigator while the walls and ceiling are still open.
  3. Plan the pipe into the framing so it runs through a closet or chase instead of across a finished wall.
  4. Retest after the finish, since the EPA says to test again once a basement becomes living space.
  5. Keep testing about every two years, in the heating season, and glance at the system’s U tube manometer now and then. If the fluid levels go even, the fan may be off, so call the installer.

The rest of the regional picture, from stone foundations to the state’s permit rules, is in our guide to finishing a basement in Northeastern Pennsylvania. If you’re planning a finish in Luzerne County, bring your radon result to the estimate, and we’ll plan the framing around a mitigation pipe if you need one.


FAQ

How common is radon in Northeastern Pennsylvania?

Very common. About 40 percent of homes tested in Pennsylvania come back at or above the EPA action level of 4 pCi/L. Radon has been found in all 67 counties, and basements average about twice the level of first floors. The only way to know your own home’s level is to test it.

What radon level is safe in a basement?

There’s no level that’s proven perfectly safe. The EPA sets its action level at 4 pCi/L and suggests considering a fix between 2 and 4, especially in a space people use every day.

How much does radon mitigation cost in Pennsylvania?

Nationally, Angi puts the average at about $1,043, with most jobs between $805 and $1,326, though harder houses can run $1,000 to $3,000. Prices vary by house and region, so get a quote from a Pennsylvania certified mitigator.

Does radon mitigation work in a finished basement?

Yes. A sub slab system works the same way in a finished basement; the difference is routing the pipe through finished space, which can cost more. That’s why it’s easier to test and install before the walls close.

Can I install my own radon system in Pennsylvania?

Pennsylvania’s certification rules don’t apply to a person testing or mitigating a building they own or live in, so the law allows it. Anyone you hire to do it must be certified, and most homeowners hire a certified mitigator to size the fan and seal the slab correctly.

How often should I test for radon?

DEP suggests retesting about every two years, preferably in the heating season. Also test again after finishing a basement or doing other major work, since the EPA says renovations can change radon levels.

Get Your Free Quote

Tell us about your project and we will get back to you with a real number for your space. No pressure, no obligation.

Free Quote (Footer)

Ready to Transform Your Home?

Our Wilkes-Barre team is ready to bring your vision to life. Get a free, no-obligation estimate today.

Written by the 570 Remodeling Team

570 Remodeling is Wilkes-Barre’s trusted local remodeling contractor, serving Luzerne County homeowners with bathroom, kitchen, basement, deck, siding, and roofing projects since day one. Every article is written from real field experience, not guesswork.

You Might Also Like

Ready to Start Your Remodel?

Wilkes-Barre’s local remodeling contractor, honest estimates, no pressure, real craftsmanship. Call us today or request your free quote online.