A simple clock icon with a gold-brown circular background. The hour hand points to 9 and the minute hand points to 5, indicating the time is approximately 9:25. The clock hands and markings are dark green.

Open

Monday to Friday, 8AM to 5PM

Can You Move a Toilet in a Bathroom Remodel? Cost and Limits

A bearded man in work clothes installs a white toilet over a floor flange in a room under construction with exposed wooden wall studs. A hand saw rests on the plywood floor near a white pipe, with a window visible in the background.

Yes, you can move a toilet, and how far it goes sets most of the price. A shift of an inch or two can be done with a part that costs under $20. Moving it a few feet toward the main drain stack runs about $500 to $1,500 in plumbing, and moving it across the room runs about $2,500 to $5,000, according to Block Renovation’s June 2026 plumbing guide.

Distance isn’t the whole story, though. A toilet moved 4 feet can cost more than one moved 6, and the reason is under the floor.

What It Costs to Move a Toilet, by Distance

These are national figures for the plumbing work. Patching the floor, the wall and any ceiling below usually comes on top.

How far it movesWhat it takesTypical cost
An inch or twoAn offset flange on the existing drainUnder $20 in parts, plus labor
A few feet, toward the stackA short reroute of the existing drain$500 to $1,500
A few feet, with lines reroutedNew drain and supply runs, floor opened$1,000 to $3,500
Across the roomA long new 3 inch drain run, framing work$2,500 to $5,000
Any move on a concrete slabCutting and repouring the concreteAdd $1,000 to $3,000 or more

Sources: Mr. Rooter (March 2026) for the offset flange, Block Renovation (June 2026) for the reroutes, the long move and the slab, and HomeGrail (January 2026) for the rerouted lines range. Fixr’s figure sits in the same neighborhood: $550 to $3,900 for a toilet moved and installed new.

Treat every number here as a starting point. Nobody can price a toilet move until they’ve seen where the drain runs and what’s under the floor, so get a quote for your bathroom before you commit to a new layout.


Why the Toilet Is the Hardest Fixture to Move

A sink drains through a small pipe and connects with flexible supply lines, so it moves fairly easily. A toilet’s a different job, and it comes down to four things.

  • A 3 inch drain. That’s the standard size, per Angi, and it’s far bigger than a sink’s drain.
  • A steady slope. The pipe has to fall the whole way, and Block puts it at about a quarter inch per foot, so a 6 foot run drops an inch and a half before it reaches the stack.
  • A vent. Every fixture needs air behind its drain so the water doesn’t siphon the trap dry and let sewer gas into the room.
  • A short trip to the stack. Plumber Shaylin King told The Spruce he keeps toilets within about 6 feet of the soil stack, the main vertical drain pipe.

So every foot you add means more pipe, more drop to fit under the floor, and more framing in the way. Block’s guide sums up the pattern with a real case: a powder room whose toilet moved 3 feet toward the stack instead of away from it saved the owner several thousand dollars.

That’s why direction matters as much as distance. A toilet that slides closer to the stack is often a simple job. One that moves away from it can need a new vent and a much longer drain.


What’s Under the Floor Sets the Price

Two toilets can move the same distance and land thousands of dollars apart. What’s under the bathroom floor is usually the reason.

Which way the floor joists run

Floor joists are the wooden beams that hold up the floor. A 3 inch drain that runs the same direction as the joists can slide between them. Crossing them is another story. The drain has to go through the beams, which means cutting a path in each one it meets and then reinforcing every one of them so the floor still carries its load.

So a 4 foot move can cost more than a 6 foot one. If the 4 foot move crosses three joists and the 6 foot move runs between two, the shorter move is the harder job. Cutting into joists is engineering work, often with its own permit, and it’s the part a homeowner can’t see from the bathroom.

A basement, a crawlspace or a ceiling below

If there’s an open basement or a crawlspace under the bathroom, the plumber can work from below. HomeGrail puts drain rerouting in a reachable space at about $750 to $1,000 to start.

A second floor bathroom isn’t as easy. The new drain runs through the ceiling of the room below, so that ceiling gets opened and patched afterward.

A concrete slab

On a slab, the drain is buried in concrete. Moving it means breaking the slab, rerouting the pipe and pouring new concrete. Block adds $1,000 to $3,000 or more for that, plus days of curing time before the floor can be finished.


Moving a Toilet a Few Inches: The Offset Flange

If the toilet only needs to shift an inch or two, there’s a cheaper route. An offset flange is a fitting that bolts the toilet a couple of inches off the old drain’s center, so nobody cuts a new hole in the floor. Mr. Rooter puts the flange and a new supply line at under $20 together.

It’s got two catches:

  • The old spot may show. If the new toilet’s base doesn’t cover it, you’ll see where the old one sat.
  • A slower flush. The offset bends the water’s path slightly, and Mr. Rooter warns it can cause a stoppage.

An offset flange works best for a small fix, like getting a toilet out of a tight spot beside a new vanity. It’s also worth checking the rough in, the distance from the finished wall to the toilet’s floor bolts. Twelve inches is standard, but older homes often have 10 or 14, and buying a toilet made for your rough in can solve a spacing problem without moving the drain at all.


The Costs Around the Move

The plumbing line on a quote is only part of the bill. HomeGrail lists the usual extras:

  • A new toilet, about $150 to $300 or more.
  • Floor repair, under $1,000 if the subfloor is sound.
  • Wall work, $300 to $800, more if framing needs repair.
  • Replacing an old drain or vent line, $1,000 to $1,500 or more.

Older houses can add to that. This Old House notes cast iron toilet flanges were typical in homes built before 1980, and cutting into old cast iron can turn up rot or cracks that need fixing too. Our guide to the hidden costs behind bathroom walls goes through what tends to turn up.

Then there’s the permit. Block notes most fixture moves need a plumbing permit and at least one inspection, and the rough in plumbing has to pass before the walls and floor close up. The City of Wilkes-Barre’s building permits page lists plumbing work among the jobs that need one. Here’s how bathroom permits work in Pennsylvania and who usually pulls them.


Should You Move the Toilet?

Start with the layout, not the toilet. Sketch the room with the toilet where it sits now and see whether moving the vanity, the shower or the door gets you what you want. Our bathroom layout planning guide has the clearances to check.

If the toilet still has to move, these rules usually hold:

  • If it only needs an inch or two, use an offset flange or a toilet with a different rough in.
  • If it moves toward the stack and along the joists, it’s usually a reasonable cost, often under $1,500 in plumbing.
  • If it moves away from the stack or across the joists, or sits on a slab, plan on $2,500 or more, and get it priced on its own before you settle the rest of the design.
  • If it ends up more than about 6 feet from the stack, expect a new vent and ask whether a different layout gets you most of the way there.

Before you ask for a quote, find out three things: where the main stack runs, which way the joists run under the bathroom, and whether the room under it has an open ceiling, a finished one or a concrete slab. If you’re weighing a move, 570 Remodeling can look at what’s under your bathroom floor and give you a free estimate.


Frequently Asked Questions

How much does it cost to move a toilet?

Moving a toilet a few feet toward the main drain usually costs $500 to $1,500 in plumbing, and moving it across the room costs $2,500 to $5,000, based on Block Renovation’s 2026 figures. A concrete slab adds $1,000 to $3,000 or more. Repairs to the floor and the wall around it come on top, and so does the ceiling below if it’s opened.

How much does it cost to move a toilet 5 feet?

It depends on direction and what’s under the floor. Five feet toward the stack, with the drain running between the joists, can stay in Block’s $500 to $1,500 range. Five feet away from the stack, across the joists or through a slab, can run $2,500 to $5,000 or more.

Can you move a toilet without moving the main drain?

Yes. The main stack doesn’t move, and the toilet gets a new branch drain that slopes back to it. Block notes a toilet can shift a few feet and still tie into the existing drain as long as the new run keeps its slope.

Can you move a toilet to a shower drain?

No. A shower drains through a 2 inch pipe, and a toilet needs a 3 inch drain with its own vent, so a toilet can’t simply connect where a shower drain was. The plumber has to run a properly sized drain to the new spot.

Why is moving a toilet more expensive than moving a sink?

A sink uses small drains and flexible supply lines that fit through the framing easily. A toilet needs a 3 inch drain that slopes the whole way to the stack and a vent, so moving it usually means opening the floor and sometimes cutting joists.

Do you need a permit to move a toilet in Pennsylvania?

Usually, yes. Most towns require a plumbing permit for moving fixtures, and the new drain has to pass a rough in inspection before the floor closes. Wilkes-Barre lists plumbing work among the jobs that need a permit, so you’ll want to check with your local permit office before work starts.

Get Your Free Quote

Tell us about your project and we will get back to you with a real number for your space. No pressure, no obligation.

Free Quote (Footer)

Ready to Transform Your Home?

Our Wilkes-Barre team is ready to bring your vision to life. Get a free, no-obligation estimate today.

Written by the 570 Remodeling Team

570 Remodeling is Wilkes-Barre’s trusted local remodeling contractor, serving Luzerne County homeowners with bathroom, kitchen, basement, deck, siding, and roofing projects since day one. Every article is written from real field experience, not guesswork.

You Might Also Like

Ready to Start Your Remodel?

Wilkes-Barre’s local remodeling contractor, honest estimates, no pressure, real craftsmanship. Call us today or request your free quote online.