A simple clock icon with a gold-brown circular background. The hour hand points to 9 and the minute hand points to 5, indicating the time is approximately 9:25. The clock hands and markings are dark green.

Open

Monday to Friday, 8AM to 5PM

Common Bathroom Layouts by Size: 5×8, 5×10, 8×10 and Up

A man in a green sweater and tan pants crouches on a white hexagonal tile floor, using a yellow tape measure to gauge the length of a bathtub. The bathroom features light green subway tiles, a white vanity, and a towel hanging on the wall.

Bathroom layouts by size mostly come down to how much wall you’ve got for the tub. In a 5 by 8 foot bathroom, the classic layout puts a 60 inch tub across the 5 foot end, wall to wall, with the toilet and vanity side by side along one long wall.

A 5 by 10 gives that same plan 2 more feet, usually spent on a longer vanity or a separate shower. At 8 by 10 you can fit a tub, a separate shower and a double vanity, often with room left for a toilet in its own small enclosure.

Each size has one layout that keeps every drain where it already is. Each also has a popular change that moves one, and that change is where a layout’s price jumps.

The Clearances Every Layout Has to Hit

A few numbers shape every one of them. Under the model code Pennsylvania uses:

  • The toilet’s center sits at least 15 inches from a side wall or the next fixture.
  • You need at least 21 inches of clear floor in front of the toilet and in front of the sink.
  • A shower needs 24 inches clear in front of its opening. A tub doesn’t need a set clearance in front.

Designers usually aim higher. The National Kitchen and Bath Association recommends 30 inches in front of the toilet and 36 inches between the centers of two sinks, where code allows 30. Block Renovation says a standard door also needs about 30 inches of clear floor to swing. That’s why pocket doors show up so often in small baths.


5×8 Bathroom Layouts (40 Square Feet)

Angi puts a compact full bath at 36 to 45 square feet, and Block Renovation says 40 square feet is often considered the minimum for one. A 5 by 8 sits right there.

The classic: tub on the end, everything on one wall

The 60 inch alcove tub runs across the 5 foot end. The toilet and vanity line up along one long wall, so all three fixtures drain into the same wall. Block’s March 2026 guide to 8 by 5 bathrooms calls this the most economical layout, and it’s usually the one already in the room.

Swap the tub for a shower

A shower that fills the same 5 foot alcove keeps the layout, and you don’t lose the plumbing wall. The drain still moves a few inches, from the tub’s end to wherever the shower floor slopes. Block puts adding a walk in shower to an 8 by 5 at $3,000 to $6,000 more than a tub alone.

Move the vanity to the opposite wall

Putting the vanity across from the toilet opens up the wall space, but it’ll split the plumbing across two walls. Block adds $800 to $2,000 for that move. And the walkway between tub and vanity should stay 18 to 24 inches, so the vanity has to be shallow.


5×10 Bathroom Layouts (50 Square Feet)

A 5 by 10 is the same narrow room with 2 more feet, and the main decision is what gets those 2 feet. Block’s guide to 5 by 10 floor plans lists five layouts. The ones that keep costs down put the wet fixtures on one long wall:

  • Shower stall and toilet on one long wall, the vanity on the other. Everything wet shares a wall, and the vanity gets room to breathe.
  • Tub and toilet on one long wall, the vanity on the other. It’s the same idea with a tub.
  • Tub across the 5 foot end, toilet and vanity on a long wall. Block suggests a compact 54 to 58 inch tub here, because a 60 inch tub fits with no room to spare.

Narrow rooms don’t forgive deep vanities. Block says a vanity 18 inches deep or less keeps the walkway comfortable, while 21 inches or more feels pinched, and wall mounted vanities come as narrow as 18 inches wide. Our small bathroom remodel ideas cover more ways to make a narrow room work.


8×10 Bathroom Layouts (80 Square Feet)

At 80 square feet there’s room for fixtures on both long walls with open floor between them. That’s where a separate tub and shower, a double vanity and even a toilet in its own small enclosure start to fit.

Block’s April 2026 guide to 8 by 10 floor plans makes a few useful points:

  • A shower under 36 by 36 inches feels cramped for daily use. Block recommends 36 by 48 at least, or 36 by 60 if the budget allows.
  • A double vanity adds $2,000 to $4,000 over a single, because it needs two drains and two sets of supply lines.
  • The cheapest 8 by 10 plan keeps the shower and tub on the same side of the room, so their drains share a run.
  • A toilet enclosure costs about $800 to $2,000 to frame, tile and finish.

Our guide to walk in shower size helps you pick the shower before you draw the rest.


Square Bathrooms: 8×8, 9×9 and 10×10

Square rooms don’t play by the same rules. Every wall is long enough for something, and Block’s July 2026 guide to square floor plans includes these plans.

  • 8 by 8: room for a freestanding tub in the middle with the toilet and vanity sharing one wall.
  • 9 by 9: a standard tub fits along a 9 foot wall with room left over, and a double vanity fits beside it.
  • 10 by 10: a partial wall can split the room, with the shower and double vanity on one side and the tub and toilet on the other.

A freestanding tub in the middle of the floor needs its drain run out under the floor to wherever it stands, so it’s rarely a cheap change in an existing room.


Bathroom Layouts by Size: Which Changes Move a Drain

The classic layout at each size keeps the drains where they’re plumbed now. Here’s what changes once you start moving fixtures, using Block’s 2026 figures:

Layout changeAdded costSource
Vanity moved to the opposite wall in a 5×8$800 to $2,000Block Renovation, March 2026
Toilet drain extended in a 5×8$500 to $1,500Block Renovation, March 2026
Walk in shower added beside the tub in a 5×8$3,000 to $6,000Block Renovation, March 2026
Single vanity changed to a double$2,000 to $4,000Block Renovation, April 2026
Plumbing changes in a mid range 8×10$1,500 to $4,000Block Renovation, April 2026

You’ll pay the most to move the toilet, since its 3 inch drain has to slope back to the stack. A shower or tub drain usually isn’t as hard. Our post on moving a shower or tub drain covers what decides it.

Block’s rough totals by size give a sense of scale. A basic refresh of a 5 by 8 or 5 by 10 runs about $8,000 to $15,000, a mid range job $15,000 to $28,000. An 8 by 10 runs about $12,000 to $22,000 for a basic refresh and $22,000 to $40,000 mid range.


Choosing the Layout for Your Room

Start by measuring the room and finding the wall the toilet drains into. That’s the cheapest wall to keep the fixtures on.

  • If you’ve got a 5 by 8 and you’re happy with a tub, keep the classic one wall layout. It’s the least plumbing you’ll ever pay for.
  • If you’d rather have a shower, put it in the tub’s spot before you think about moving anything else.
  • In a 5 by 10, spend the extra 2 feet on a longer vanity or a separate shower, and keep the wet fixtures on one long wall.
  • In an 8 by 10 or larger, decide on the shower size first, then see whether a double vanity still leaves 21 inches in front of everything.

Our bathroom layout planning guide walks through sketching your own room to these numbers. When you’re ready to talk through a layout for a bathroom around Wilkes-Barre, 570 Remodeling can look at the room and give you a free estimate.


Frequently Asked Questions

What is the smallest full bathroom size?

About 36 to 45 square feet. Angi says 36 to 40 square feet holds a tub and shower combo, a toilet and a small vanity, and Block Renovation says 40 square feet, a 5 by 8 room, is often considered the minimum for a full bath.

Can you fit a tub and a separate shower in a 5×8 bathroom?

It’s tight. Block shows a 5 by 8 plan with a roughly 30 by 48 inch walk in shower and a tub, but most 5 by 8 rooms don’t try to hold both. A separate tub and shower fit comfortably at about 8 by 10.

What fits in a 5×10 bathroom?

A tub or a shower stall, a toilet and a single vanity, usually with the tub or shower and the toilet on one long wall and the vanity on the other. Block suggests a vanity 18 inches deep or less to keep the walkway comfortable.

How much does a 5×8 bathroom remodel cost?

Block Renovation puts a basic refresh of a 5 by 8 at $8,000 to $15,000, a mid range remodel at $15,000 to $28,000 and a high end one at $28,000 to $45,000 or more. Moving fixtures adds to that, such as $800 to $2,000 to move the vanity to the opposite wall.

Can you fit a double vanity in an 8×10 bathroom?

Yes. An 8 by 10 is the usual size where a double vanity, a tub and a separate shower all fit. Block notes a double vanity adds $2,000 to $4,000 over a single for its second drain and supply lines.

Get Your Free Quote

Tell us about your project and we will get back to you with a real number for your space. No pressure, no obligation.

Free Quote (Footer)

Ready to Transform Your Home?

Our Wilkes-Barre team is ready to bring your vision to life. Get a free, no-obligation estimate today.

Written by the 570 Remodeling Team

570 Remodeling is Wilkes-Barre’s trusted local remodeling contractor, serving Luzerne County homeowners with bathroom, kitchen, basement, deck, siding, and roofing projects since day one. Every article is written from real field experience, not guesswork.

You Might Also Like

Ready to Start Your Remodel?

Wilkes-Barre’s local remodeling contractor, honest estimates, no pressure, real craftsmanship. Call us today or request your free quote online.